Professional Jump Starter
Model: MP767V2
Specifications
1. Power outputs: two DC 12Vand two USB ports: 5V 2A and 1A
2. Battery: 12V/22AH Yuasa sealed lead acid battery
3. Jump starter cable : #6 gauge
4. 3W * 3 high power LED
5. AC Output 300W
Warning
1. Do not ALLOW the clamps to come into contact with each other so as to avoid short-circuit. Otherwise battery can be damaged.
2. Make sure the red clamp is attached to the positive battery terminal and the black clamp to the negative terminal. REVERSE POLARITY can cause spark and may damage the battery and also the electrical system of the car.
3. ALWAYS keep the battery fully charged. To increase the life of the battery, ALWAYS recharge the unit after use. NEVER leave the battery in a discharged state for a period of time or else may damage the battery.
4. When not in use, recharge the unit every one to three months.
5. This unit is not waterproof.
![]()
![]()
![]()
![]()
![]()
![]()
Model | MP767V2 |
Output voltage | DC 12V & 5V 1A / 2.1A |
Battery capacity | 12V 22Ah ( Lead acid Battery ) |
AC output power | 300W ( Continuous ) 600W ( Peak ) |
Waveform | Modified sine wave |
Low voltage alarm | 10V ± 0.5V |
Low voltage range | 9.5V ± 0.5V |
Applicable vehicles | For 12V following car |
Jump starter cable | 6AWG |
Weight | 8KG |
Size | L22 x W21 x H32.5 (CM) |
